Synthesis of amino functionalized magnetic graphenes composite material and its application to remove Cr(VI), Pb(II), Hg(II), Cd(II) and Ni(II) from contaminated water

J Hazard Mater. 2014 Aug 15:278:211-20. doi: 10.1016/j.jhazmat.2014.05.075. Epub 2014 Jun 4.

Abstract

In the present study, a kind of graphenes magnetic material (Fe3O4-GS) was prepared by compositing graphene sheet with ferroferric oxide, and shown to be effective for removing Cr(VI), Pb(II), Hg(II), Cd(II) and Ni(II) ions from aqueous solution. The synthesized sorbent was characterized by SEM, TEM, FTIR, XRD, XPS and BET, respectively. The pHZPC value of the sorbent was estimated to be 3.5 by alkaline-titration methods. Fe3O4-GS can be simply recovered from water with magnetic separation at low magnetic field within one minute. The sorption capacities of the metals were 17.29, 27.95, 23.03, 27.83 and 22.07 mg g(-1) for Cr(VI), Pb(II), Hg(II), Cd(II) and Ni(II), respectively. Kinetic data showed good correlation with pseudo-second-order equation and the Freundlich model was found to fit for the isotherm data of all the heavy metal ions. It was found that the metals sorption was accomplished mainly via chelation or ion exchange. The results of thermodynamic studies illustrate that the adsorption process was endothermic and spontaneous in nature.

Keywords: Adsorption isotherm; Adsorption kinetics; Fe(3)O(4)-GS; Heavy metal ions; Thermodynamics.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Adsorption
  • Ferrosoferric Oxide / chemistry*
  • Graphite / chemistry*
  • Metals, Heavy / chemistry*
  • Waste Disposal, Fluid / methods
  • Water Pollutants, Chemical / chemistry*

Substances

  • Metals, Heavy
  • Water Pollutants, Chemical
  • Graphite
  • Ferrosoferric Oxide