Shelf life of fresh fruits and vegetables is greatly influenced by environmental conditions. Increasing temperature usually results in accelerated loss of quality and shelf-life reduction, which is not physically visible until too late in the supply chain to adjust logistics to match shelf life. A blackberry study showed that temperatures inside pallets varied significantly and 57% of the berries arriving at the packinghouse did not have enough remaining shelf life for the longest supply routes. Yet, the advanced shelf-life loss was not physically visible. Some of those pallets would be sent on longer supply routes than necessary, creating avoidable waste. Other studies showed that variable pre-cooling at the centre of pallets resulted in physically invisible uneven shelf life. We have shown that using simple temperature measurements much waste can be avoided using 'first expiring first out'. Results from our studies showed that shelf-life prediction should not be based on a single quality factor as, depending on the temperature history, the quality attribute that limits shelf life may vary. Finally, methods to use air temperature to predict product temperature for highest shelf-life prediction accuracy in the absence of individual sensors for each monitored product have been developed. Our results show a significant reduction of up to 98% in the root-mean-square-error difference between the product temperature and air temperature when advanced estimation methods are used.
Keywords: first expiring first out; shelf-life prediction; temperature.