Adsorption of heavy metal cations by Na-clinoptilolite: equilibrium and selectivity studies

J Environ Manage. 2014 May 1:137:69-80. doi: 10.1016/j.jenvman.2014.02.007. Epub 2014 Mar 4.

Abstract

This paper summarizes the conclusions of experiments conducted on the adsorption of Cd(2+), Co(2+), Cu(2+), Mn(2+), Ni(2+), Pb(2+) and Zn(2+) onto zeolite. The focus of the experiments was to establish the influence of the initial pH of the contact solution as well as the selectivity of zeolite on the efficiency of the adsorption process. To this end, experimental adsorption isotherms were established for the pH values ranging from 1 to 4 by using the Na-form of clinoptilolite (particle size range 0.5-1 mm) as an adsorbent. Langmuir, Freundlich and Dubinin-Raduschkevich isotherm models were used to validate the experimental data and the Gibbs free energy was calculated based on the distribution coefficient. From the Langmuir model, correlations between the maximum adsorption capacity and selected physical-chemical parameters of the cations studied were established. The results of the experiments suggest that the selectivity of zeolite is strongly influenced by the pH of the contact solution, dehydration energy of cations, diffusion coefficient and the pH at which the precipitation of hydroxides occurs.

Keywords: Adsorption isotherms; Dehydration energy; Diffusion coefficient; Hydrocomplex; Zeolite stability.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Adsorption
  • Hydrogen-Ion Concentration
  • Metals, Heavy / chemistry*
  • Models, Theoretical*
  • Solutions
  • Water Pollutants, Chemical / chemistry*
  • Zeolites / chemistry*

Substances

  • Metals, Heavy
  • Solutions
  • Water Pollutants, Chemical
  • clinoptilolite
  • Zeolites