An atmospheric chemical transport model was adapted to simulate the concentration and deposition of heavy metals (arsenic, cadmium, chromium, copper, lead, nickel, selenium, vanadium, and zinc) in the United Kingdom. The model showed that wet deposition was the most important process for the transfer of metals from the atmosphere to the land surface. The model achieved a good correlation with annually averaged measurements of metal concentrations in air. The correlation with measurements of wet deposition was less strong due to the complexity of the atmospheric processes involved in the washout of particulate matter which were not fully captured by the model. The measured wet deposition and air concentration of heavy metals were significantly underestimated by the model for all metals (except vanadium) by factors between 2 and 10. These results suggest major missing sources of annual heavy metal emissions which are currently not included in the official inventory. Primary emissions were able to account for only 9%, 21%, 29%, 21%, 36%, 7% and 23% of the measured concentrations for As, Cd, Cr, Cu, Ni, Pb and Zn. A likely additional contribution to atmospheric heavy metal concentrations is the wind driven re-suspension of surface dust still present in the environment from the legacy of much higher historic emissions. Inclusion of two independent estimates of emissions from re-suspension in the model was found to give an improved agreement with measurements. However, an accurate estimate of the magnitude of re-suspended emissions is restricted by the lack of measurements of metal concentrations in the re-suspended surface dust layer.
Keywords: Atmospheric transport model; Cadmium; FRAME; Heavy metals; Lead; Re-suspension.
Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.