Fabrication of transferable Al(2)O(3) nanosheet by atomic layer deposition for graphene FET

ACS Appl Mater Interfaces. 2014 Feb 26;6(4):2764-9. doi: 10.1021/am4052987. Epub 2014 Feb 11.

Abstract

Without introducing defects in the monolayer of carbon lattice, the deposition of high-κ dielectric material is a significant challenge because of the difficulty of high-quality oxide nucleation on graphene. Previous investigations of the deposition of high-κ dielectrics on graphene have often reported significant degradation of the electrical properties of graphene. In this study, we report a new way to integrate high-κ dielectrics with graphene by transferring a high-κ dielectric nanosheet onto graphene. Al2O3 film was deposited on a sacrificial layer using an atomic layer deposition process and the Al2O3 nanosheet was fabricated by removing the sacrificial layer. Top-gated graphene field-effect transistors were fabricated and characterized using the Al2O3 nanosheet as a gate dielectric. The top-gated graphene was demonstrated to have a field-effect mobility up to 2200 cm(2)/(V s). This method provides a new method for high-performance graphene devices with broad potential impacts reaching from high-frequency high-speed circuits to flexible electronics.