Ammonium removal from wastewater via struvite pyrolysate recycling with Mg(OH)2 addition

Water Sci Technol. 2013;68(12):2661-7. doi: 10.2166/wst.2013.540.

Abstract

Magnesium ammonium phosphate (MAP) pyrolysate recycling technology was investigated with Mg(OH)2-mediated pyrolysis. The results revealed that the removal ratio of ammonium was stable at about 75%, and could be increased to 79% after additional acidolysis. The phosphate concentration in the supernate was low at 2 mg/L. The optimum conditions for ammonia release were a 1:1 molar ratio of Mg(OH)2:NH4(+), a heating temperature of 110 °C and a heating time of 3 h. With continual additions of Mg(OH)2 to release ammonia, magnesium phosphate (Mg3(PO4)2) was suggested as a possible derivative. However, with Mg(OH)2-mediated pyrolysis, the growth and nucleation of MAP was inhibited during MAP pyrolysate recycling.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Ammonium Compounds / isolation & purification*
  • Hot Temperature
  • Kinetics
  • Magnesium Compounds / chemistry*
  • Magnesium Hydroxide / chemistry*
  • Particle Size
  • Phosphates / chemistry*
  • Recycling / methods*
  • Struvite
  • Wastewater / chemistry*
  • Water Pollutants, Chemical / isolation & purification*
  • Water Purification / methods*

Substances

  • Ammonium Compounds
  • Magnesium Compounds
  • Phosphates
  • Waste Water
  • Water Pollutants, Chemical
  • Struvite
  • Magnesium Hydroxide