Ammonia sanitisation of sewage sludge using urea

Water Sci Technol. 2013;68(8):1866-72. doi: 10.2166/wst.2013.443.

Abstract

The aim of the study was to develop a simple, low-cost treatment for sewage sludge using urea as a sanitising agent. Sewage sludge was spiked with Enterococcus faecalis and Salmonella typhimurium, treated with 0.5, 1, 1.5 and 2% w/w urea at laboratory scale, and the viability was monitored during 4 months of storage at 4, 10 and 22 °C (only 0.5%). A linear relationship was identified between Salmonella spp. inactivation rate and ammonia (NH3) concentration. Temperature had a positive impact on Salmonella spp. inactivation at higher temperatures, but in the range 4-10 °C temperature influenced this inactivation merely by its impact on the ammonia equilibrium. Enterococcus spp. was more persistent and a lag phase of up to 11 weeks was observed. Higher temperature and ammonia concentration reduced the lag phase duration significantly, and also had a clear effect on the inactivation rate for the treatments with 0.5% urea at 22 °C and 2% urea at 4 and 10 °C. Urea sanitisation of sewage sludge can give a 2 log10 reduction of Enterococcus spp. and more than a 5 log10 reduction of Salmonella spp. within 6 weeks with either 0.5% w/w urea at 22 °C or 2% urea at 10 °C.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Ammonia*
  • Disinfection / methods*
  • Enterococcus
  • Enterococcus faecalis
  • Hydrogen-Ion Concentration
  • Salmonella
  • Salmonella typhimurium
  • Sewage / microbiology*
  • Temperature
  • Urea* / administration & dosage

Substances

  • Sewage
  • Ammonia
  • Urea