The accuracy and precision of air quality models are usually associated with the emission inventories. Thus, in order to assess if there are any improvements on air quality regional simulations using detailed methodology of road traffic emission estimation, a regional air quality modelling system was applied. For this purpose, a combination of top-down and bottom-up approaches was used to build an emission inventory. To estimate the road traffic emissions, the bottom-up approach was applied using an instantaneous emission model (Vehicle Specific Power - VSP methodology), and an average emission model (CORINAIR methodology), while for the remaining activity sectors the top-down approach was used. Weather Research and Forecasting (WRF) and Comprehensive Air quality (CAMx) models were selected to assess two emission scenarios: (i) scenario 1, which includes the emissions from the top-down approach; and (ii) scenario 2, which includes the emissions resulting from integration of top-down and bottom-up approaches. The results show higher emission values for PM10, NOx and HC, for scenario 1, and an inverse behaviour to CO. The highest differences between these scenarios were observed for PM10 and HC, about 55% and 75% higher (respectively for each pollutant) than emissions provided by scenario 2. This scenario gives better results for PM10, CO and O3. For NO2 concentrations better results were obtained with scenario 1. Thus, the results obtained suggest that with the combination of the top-down and bottom-up approaches to emission estimation several improvements in the air quality results can be achieved, mainly for PM10, CO and O3.
Keywords: Air quality; Emissions; Numerical modelling; Regional scale; Road traffic.
© 2013 Elsevier B.V. All rights reserved.