This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 2(2) full factorial plan and the highest extraction yields for yttrium and zinc equal to 100% are observed under the following conditions: 3M of sulphuric acid, 10% v/v of H2O2 concentrated solution at 30% v/v, 10% w/w pulp density, 70°C and 3h of reaction. Two series of precipitation tests for zinc are carried out: a 2(2) full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2-2.5% and 10-12%v/v of Na2S concentrated solution at 10%w/v. In these conditions the coprecipitation of yttrium is of 15-20%. Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75-80%.
Keywords: Cathode ray tubes (CRT); Fluorescent powder; WEEE; Yttrium; Zinc removal.
Copyright © 2013 Elsevier Ltd. All rights reserved.