The oxidation of nanomolar copper(I) at low oxygen (6 μM) concentrations was studied as a function of pH (6.7-8.2), ionic strength (0.1-0.76 M), total inorganic carbon concentration (0.65-6.69 mM), and the added concentration of hydrogen peroxide, H(2)O(2) (100-500 nM) over the initial 150 nM H(2)O(2) concentration in the coastal seawater. The competitive effect between H(2)O(2) and O(2) at low O(2) concentrations has been described. Both the oxidation of Cu(I) by oxygen and by H(2)O(2) had a reaction order of one. The reduction of Cu(II) back to Cu(I) in the studied seawater by H(2)O(2) and other reactive oxygen intermediates took place at both high and low O(2) concentrations. The effect of the pH on oxidation was more important at low oxygen concentrations, where δlog k/δpH was 0.85, related to the presence of H(2)O(2) in the initial seawater and its role in the redox chemistry of Cu species, than at oxygen saturation, where the value was 0.6. A kinetic model that considered the Cu speciation, major ion interactions, and the rate constants for the oxidation and reduction of Cu(I) and Cu(II) species, respectively, was applied. When the oxygen concentration was lower than 22 μM and under the presence of 150 nM H(2)O(2), the model showed that the oxidation of Cu(I) was controlled by its reaction with H(2)O(2). The effect of the pH on the oxidation rate of Cu(I) was explained by its influence on the oxidation of Cu(I) with O(2) and H(2)O(2), making the model valid for any low oxygen environment.