Highly sensitive biosensor based on UV-imprinted layered polymeric-inorganic composite waveguides

Opt Express. 2012 Aug 27;20(18):20309-17. doi: 10.1364/OE.20.020309.

Abstract

An evanescent field sensor utilizing layered polymeric-inorganic composite waveguide configuration was developed in this work. The composite waveguide structure consists of a UV-imprint patterned polymer inverted rib waveguide with a Ta2O5 thin film sputter-deposited on top of the low refractive index polymer layers. The results suggest that the polymer based sensor can achieve a detection limit of 3 × 10(-7) RIU for refractive index sensing and corresponding limit of about 100 fg/mm2 for molecular adsorption detection. Besides enhancing the sensitivity significantly, the inorganic coating on the polymer layer was found to block water absorption effectively into the waveguide resulting in a stabilized sensor operation. The ability to use the developed sensor in specific molecular detection was confirmed by investigating antibody - antigen binding reactions. The results of this work demonstrate that high performance sensing capability can be obtained with the developed composite waveguide sensor.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Biosensing Techniques / instrumentation*
  • Equipment Design
  • Equipment Failure Analysis
  • Immunoassay / instrumentation*
  • Inorganic Chemicals / chemistry*
  • Molecular Imprinting / instrumentation*
  • Molecular Imprinting / methods*
  • Polymers / chemistry*
  • Refractometry / instrumentation*
  • Surface Plasmon Resonance / instrumentation*

Substances

  • Inorganic Chemicals
  • Polymers