In this study, nanofibre mats for chemical adsorption of heavy metals were prepared by electrospinning blends of hydrolyzed keratin (HK) and polyamide 6 (PA6) in formic acid. Viscosity measurements of the spinning solutions and morphological analyses of the fracture sections of the same polymer blends cast into films, suggested intermolecular interactions and good compatibility between HK and PA6. The mats made of continuous randomly oriented blend nanofilaments of HK/PA6 50/50 wt, with a mean diameter of about 200 nm, were tested as chromium (VI) ion adsorbents. The parameters investigated included initial chromium ion concentration, pH, contact time and adsorbent dosage. The maximum adsorption capacity occurred at acidic pH. The pseudo-first order, the pseudo-second order and the intraparticle diffusion models were used to describe the kinetics of adsorption process. It was found that kinetic data fit the pseudo-second order model and follow the intraparticle diffusion model, although diffusion is not the only rate control step. Adsorption data fit well the Freundlich isotherm model and the maximum adsorption capacity was found 55.9 mg/g. Moreover, the mean free energy (E) of adsorption ranges between 8 and 16 kJ/mol, so that the adsorption mechanism for HK-based nanofibres was explained as an ion-exchange process.