Bacterial nanocellulose (BNC) is an extraordinary biopolymer with a wide range of potential technical applications. The high specific surface area and the interconnected pore system of the nanofibrillar BNC network suggest applications as a carrier of catalysts. The present paper describes an in situ modification route for the preparation of a hybrid material consisting of BNC and photocatalytically active anatase (TiO(2)) nanoparticles (NPs). The influence of different NP concentrations on the BNC biosynthesis and the resulting supramolecular structure of the hybrids was investigated. It was found that the number of colony forming units (CFUs) and the consumption of glucose during biosynthesis remained unaffected compared to unmodified BNC. During the formation of the BNC network, the NPs were incorporated in the whole volume of the accruing hybrid. Their distribution within the hybrid material is affected by the anisotropic structure of BNC. The photocatalytic activity (PCA) of the BNC-TiO(2) hybrids was determined by methanol conversion (MC) under UV irradiation. These tests demonstrated that the NPs retained their PCA after incorporation into the BNC carrier structure. The PCA of the hybrid material depends on the amount of incorporated NPs. No alteration of the photocatalyst's efficiency was found during repeated PCA tests. In conclusion, the in situ integration of photocatalytically active NPs into BNC represents an attractive possibility to extend its fields of application to porous filtering media for drinking water purification and air cleaning.