The introduction of hydrogen chloride during the in situ doping of silicon nanowires (SiNWs) grown using the vapor-liquid-solid (VLS) mechanism was investigated. Compared with non-chlorinated atmospheres, the use of HCl with dopant gases considerably improves the surface morphology of the SiNWs, leading to extremely smooth surfaces and a greatly reduced tapering. Variations in the wire diameter are massively reduced for boron doping, and cannot be measured at 600 °C for phosphorous over several tens of micrometers. This remarkable feature is accompanied by a frozen gold migration from the catalyst, with no noticeable levels of gold clusters observed using scanning electron microscopy. A detailed study of the apparent resistivity of the NWs reveals that the dopant incorporation is effective for both types of doping. A graph linking the apparent resistivity to the dopant to silane dilution ratio is built for both types of doping and discussed in the frame of the previous results.