Comparison of trace element emissions from thermal treatments of heavy metal hyperaccumulators

Environ Sci Technol. 2012 May 1;46(9):5025-31. doi: 10.1021/es202616v. Epub 2012 Apr 13.

Abstract

Phytoextraction has become one of the most promising remediation techniques for heavy metal (HM) contaminated soils. However, the technique invariably produces large amounts of HM-enriched hyperaccumulators, which need further safe disposal. In this study, two different thermal treatment methods are investigated as potential options for evaporative separation of HMs from the residues. A horizontal tube furnace and a vertical entrained flow tube furnace were used for testing the disposal of grounded hyperaccumulators. The release characteristics of HMs (Cd, Cu, Pb, and Zn) into flue gas and residues were investigated for thermal treatment of the Cd and Zn hyperaccumulators Sedum plumbizincicola and Sedum alfredii. In a horizontal tube furnace, incineration favors the volatilization of Cu and Cd in contrast to pyrolysis. The percentages of HMs in residues after incineration are lower than those after pyrolysis, especially for Cd, Pb, and Zn. However, in an entrained flow tube furnace, Zn content in flue gas increases with increasing temperature, but Cu and Cd contents are fluctuated. In addition, a higher incineration temperature enhances the Cu content in residues.

Publication types

  • Comparative Study
  • Research Support, Non-U.S. Gov't

MeSH terms

  • Biodegradation, Environmental
  • Gases / analysis*
  • Hot Temperature
  • Incineration*
  • Metals, Heavy / analysis*
  • Metals, Heavy / metabolism
  • Sedum / metabolism*

Substances

  • Gases
  • Metals, Heavy