Centralized PI controllers for interacting multivariable processes by synthesis method

Abstract

In this article, two methods of designing a centralized control system for multi-input, multi-output (MIMO) processes are presented. Centralized proportional-integral (PI) controllers are designed based on a direct synthesis method. The inverse of the process transfer function matrix in the direct synthesis method is approximated based on the relative gain array concept. The method is further improved by using a relative normalized gain array, and an equivalent transfer function for each element in the process transfer function matrix is derived for the closed-loop control system. The transpose of the effective transfer function is used to approximate the inverse of the process transfer function matrix. The simulation studies demonstrate the effectiveness of this method. The proposed centralized controllers reduce the interactions better than recently reported decentralized controllers do. A centralized controller designed based on a relative normalized gain array (RNGA) gives a better performance than a centralized controller designed based on a relative gain array (RGA).