Removal of arsenic from water by Friedel's salt (FS: 3CaO·Al2O3·CaCl2·10H2O)

J Hazard Mater. 2011 Nov 15:195:398-404. doi: 10.1016/j.jhazmat.2011.08.058. Epub 2011 Aug 26.

Abstract

Low levels of arsenic can be effectively removed from water by adsorption onto various materials and searching for low-cost, high-efficiency new adsorbents has been a hot topic in recent years. In the present study, the performance of Friedel's salt (FS: 3CaO·Al(2)O(3)·CaCl(2)·10H(2)O), a layered double hydroxide (LDHs), as an adsorbent for arsenic removal from aqueous solution was investigated. Friedel's salt was synthesized at lower temperature (50°C) compared to traditional autoclave methods by reaction of calcium chloride with sodium aluminate. Kinetic study revealed that adsorption of arsenate by Friedel's salt was fast in the first 12h and equilibrium was achieved within 48 h. The adsorption kinetics are well described by second-order Lageren equation. The adsorption capacity of the synthesized sorbent for arsenate at pH 4 and 7 calculated from Langmuir adsorption isotherms was 11.85 and 7.80 mg/g, respectively. Phosphate and silicate markedly decreased the removal of arsenate, especially at higher pH, but sulfate was found to suppress arsenate adsorption at lower pH and the adverse effect was disappeared at pH ≥ 6. Common metal cations (Ca(2+), Mg(2+)) enhanced arsenate adsorption. The results suggest that Friedel's salt is a potential cost-effective adsorbent for arsenate removal in water treatment.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Adsorption
  • Arsenic / isolation & purification*
  • Kinetics
  • Salts / chemistry*
  • Surface Properties
  • Water Pollutants, Chemical / isolation & purification*

Substances

  • Salts
  • Water Pollutants, Chemical
  • Arsenic