Analytical method for the simultaneous determination of polyfunctional amines used as monomers in the manufacture of food packaging materials

J Chromatogr A. 2011 Oct 7;1218(40):7105-9. doi: 10.1016/j.chroma.2011.07.068. Epub 2011 Jul 30.

Abstract

This paper describes the development of a multi-analyte method for the determination of polyfunctional amines commonly used as monomers in the manufacture of food contact materials. Amines were analyzed by high-performance-liquid chromatography with diode-array detection (HPLC-DAD) after derivatization with dansyl chloride. The chromatographic analysis and the derivatization conditions were optimized. The proposed method was validated in terms of linearity, limits of detection and repeatabilities. The method showed an excellent sensitivity (LOD≤0.05 μg/mL) and appropriate repeatabilites (RSD (n=7)≤5%)). LC-MS/MS was used as a confirmatory technique. The stability of the amines in five food simulants (distilled water, 3% acetic acid, 10% ethanol, 50% ethanol and olive oil) under the most common testing conditions (10 days at 40 °C) was also studied. Results showed that amines had an acceptable stability in aqueous simulants but in the olive oil a loss of 100% was observed for all analytes.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Amines / analysis*
  • Amines / isolation & purification
  • Chromatography, High Pressure Liquid / methods*
  • Dansyl Compounds
  • Food Analysis / methods
  • Food Packaging*
  • Methanol
  • Models, Chemical
  • Reproducibility of Results
  • Sensitivity and Specificity
  • Tandem Mass Spectrometry / methods*
  • Water

Substances

  • Amines
  • Dansyl Compounds
  • Water
  • dansyl chloride
  • Methanol