Steady-state visual-evoked potential (SSVEP)-based brain-computer interfaces (BCIs) have generated significant interest due to their high information transfer rate (ITR). Due to the amplitude-frequency characteristic of the SSVEP, the flickering frequency of an SSVEP-based BCI is typically lower than 20 Hz to achieve a high SNR. However, a visual flicker with a flashing frequency below the critical flicker-fusion frequency often makes subjects feel flicker jerky and causes visual discomfort. This study presents a novel technique using high duty-cycle visual flicker to decrease user's visual discomfort. The proposed design uses LEDs flashing at 13.16 Hz, driven by flickering sequences consisting of repetitive stimulus cycles with a duration T (T = 76 ms). Each stimulus cycle included an ON state with a duration T(ON) and an OFF state with a duration T(OFF) (T = T(ON) + T(OFF)), and the duty cycle, defined as T(ON)/T, varied from 10.5% to 89.5%. This study also includes a questionnaire survey and analyzes the SSVEPs induced by different duty-cycle flickers. An 89.5% duty-cycle flicker, reported as a comfortable flicker, was adopted in a phase-tagged SSVEP system. Six subjects were asked to sequentially input a sequence of cursor commands with the 25.08-bits/min ITR.