Electrochemical degradation of a real textile effluent using boron-doped diamond or β-PbO2 as anode

J Hazard Mater. 2011 Sep 15;192(3):1275-82. doi: 10.1016/j.jhazmat.2011.06.039. Epub 2011 Jul 13.

Abstract

Constant current electrolyses are carried out in a filter-press reactor using a boron-doped diamond (Nb/BDD) or a Ti-Pt/β-PbO(2) anode, varying current density (j) and temperature. The degradation of the real textile effluent is followed by its decolorization and chemical oxygen demand (COD) abatement. The effect of adding NaCl (1.5 g L(-1)) on the degradation of the effluent is also investigated. The Nb/BDD anode yields much higher decolorization (attaining the DFZ limit) and COD-abatement rates than the Ti-Pt/β-PbO(2) anode, at any experimental condition. The best conditions are j = 5 mA cm(-2) and 55 °C, for the system's optimized hydrodynamic conditions. The addition of chloride ions significantly increases the decolorization rate; thus a decrease of more than 90% of the effluent relative absorbance is attained using an applied electric charge per unit volume of the electrolyzed effluent (Q(ap)) of only about 2 kA h m(-3). Practically total abatement of the effluent COD is attained with the Nb/BDD anode using a Q(ap) value of only 7 kA h m(-3), with an energy consumption of about 30 kW h m(-3). This result allows to conclude that the Nb/BDD electrode might be an excellent option for the remediation of textile effluents.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Boron / chemistry*
  • Chlorides / chemistry
  • Diamond
  • Electrochemistry / methods*
  • Electrodes
  • Electrolysis
  • Filtration
  • Industrial Waste
  • Ions
  • Lead / chemistry*
  • Oxygen / chemistry*
  • Temperature
  • Textiles
  • Water Pollutants, Chemical / analysis*
  • Water Purification / methods

Substances

  • Chlorides
  • Industrial Waste
  • Ions
  • Water Pollutants, Chemical
  • Lead
  • Diamond
  • Boron
  • Oxygen