A novel tubular ultrasonic motor is presented that uses only a single vibration bending mode of a piezoelectric tube to generate rotation. When the piezoelectric tube bends, the diagonal motion of points on selected areas at the ends of the tube generates forces with tangential components along the same circumferential direction, driving the rotors to rotate. Bi-directional motion is achieved by simply switching the direction of bending. Because only one vibration mode is used, the motor requires only one driving signal and no vibration mode coupling is needed, simplifying the design, fabrication, assembly, and operation of the device. Two prototypes [one with cut-in lead zirconate titanate (PZT) teeth and one with added metal teeth] were built and tested using PZT tubes available to the authors. The tubes have an outside diameter of 6.6 mm, inner diameter of 5.0 mm, and length of 25.4 mm. The working frequencies of the two motors are 27.6 and 23.5 kHz. The motors achieved a maximum no-load speed of 400 rpm and a stall torque of 300 μN·m.