Two-level noncontiguous versus three-level anterior cervical discectomy and fusion: a biomechanical comparison

Spine (Phila Pa 1976). 2011 Mar 15;36(6):448-53. doi: 10.1097/BRS.0b013e3181fd5d7c.

Abstract

Study design: Biomechanical study.

Objective: To determine biomechanical forces exerted on intermediate and adjacent segments after two- or three-level fusion for treatment of noncontiguous levels.

Summary of background data: Increased motion adjacent to fused spinal segments is postulated to be a driving force in adjacent segment degeneration. Occasionally, a patient requires treatment of noncontiguous levels on either side of a normal level. The biomechanical forces exerted on the intermediate and adjacent levels are unknown.

Methods: Seven intact human cadaveric cervical spines (C3-T1) were mounted in a custom seven-axis spine simulator equipped with a follower load apparatus and OptoTRAK three-dimensional tracking system. Each intact specimen underwent five cycles each of flexion/extension, lateral bending, and axial rotation under a ± 1.5 Nm moment and a 100-Nm axial follower load. Applied torque and motion data in each axis of motion and level were recorded. Testing was repeated under the same parameters after C4-C5 and C6-C7 diskectomies were performed and fused with rigid cervical plates and interbody spacers and again after a three-level fusion from C4 to C7.

Results: Range of motion was modestly increased (35%) in the intermediate and adjacent levels in the skip fusion construct. A significant or nearly significant difference was reached in seven of nine moments. With the three-level fusion construct, motion at the infra- and supra-adjacent levels was significantly or nearly significantly increased in all applied moments over the intact and the two-level noncontiguous construct. The magnitude of this change was substantial (72%).

Conclusion: Infra- and supra-adjacent levels experienced a marked increase in strain in all moments with a three-level fusion, whereas the intermediate, supra-, and infra-adjacent segments of a two-level fusion experienced modest strain moments relative to intact. It would be appropriate to consider noncontiguous fusions instead of a three-level fusion when confronted with nonadjacent disease.

Publication types

  • Comparative Study

MeSH terms

  • Biomechanical Phenomena
  • Bone Plates
  • Cadaver
  • Cervical Vertebrae / physiopathology
  • Cervical Vertebrae / surgery*
  • Diskectomy / instrumentation
  • Diskectomy / methods*
  • Humans
  • Intervertebral Disc / physiopathology
  • Intervertebral Disc / surgery*
  • Middle Aged
  • Range of Motion, Articular
  • Rotation
  • Spinal Fusion / instrumentation
  • Spinal Fusion / methods*