Modeling nitrogen removal for a denitrification biofilter

Bioprocess Biosyst Eng. 2011 Aug;34(6):747-55. doi: 10.1007/s00449-011-0524-0. Epub 2011 Feb 22.

Abstract

Nitrous oxide (N2O) is a major greenhouse gas, heavily contributing to global warming. N2O is emitted from various sources such as wastewater treatment plants, during the nitrification and denitrification steps. ASM models, which are commonly used in wastewater treatment, usually consider denitrification as a one-step process (NO3- directly reduced to N2) and are as such unable to provide values for intermediate products of the reaction like N2O. In this study, a slightly modified ASM1 model was implemented in the GPS-X software to simulate the concentration of such intermediate products (NO2-, NO and N2O) and to estimate the amounts of gaseous N2O emitted by the denitrification stage (12 biofilters) of the Seine-Centre WWTP (SIAAP, Paris). Simulations running on a 1-year period have shown good agreements with measured effluent data for nitrate and nitrite. The calculated mean value for emitted N2O is 4.95 kgN-N2O/day, which stands in the typical range of estimated experimental values of 4-31 kgN-N2O/day. Nitrous oxide emissions are usually not measured on WWTPs and so, as obtained results show, there is a certain potential for using models that quantify those emissions using traditionally measured influent data.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Computer Simulation*
  • Denitrification*
  • Models, Chemical*
  • Nitrates / chemistry
  • Nitrites / chemistry
  • Nitrogen / chemistry
  • Nitrogen Oxides / analysis*
  • Nitrogen Oxides / chemistry
  • Paris
  • Software*
  • Waste Disposal, Fluid / methods
  • Water Purification / methods

Substances

  • Nitrates
  • Nitrites
  • Nitrogen Oxides
  • Nitrogen