Industrial wastewater pre-treatment for heavy metal reduction by employing a sorbent-assisted ultrafiltration system

Abstract

This work examined the adoption of a sorbent-assisted ultrafiltration (UF) system for the reduction of Pb(II), Cu(II), Zn(II) and Ni(II) from industrial wastewater. In such a system metals were removed via several processes which included precipitation through the formation of hydroxides, formation of precipitates/complexes among the metal ions and the wastewater compounds, adsorption of metals onto minerals (bentonite, zeolite, vermiculite) and retention of insoluble metal species by the UF membranes. At pH=6 the metal removal sequence obtained by the UF system was Pb(II)>Cu(II)>Zn(II)>Ni(II) in mg g⁻¹ with significant amount of lead and copper being removed due to chemical precipitation and formation of precipitates/complexes with wastewater compounds. At this pH, zinc and nickel adsorption onto minerals was significant, particularly when bentonite and vermiculite were employed as adsorbents. Metal adsorption onto zeolite and bentonite followed the sequence Zn(II)>Ni(II)>Cu(II)>Pb(II), while for vermiculite the sequence was Ni(II)>Zn(II)>Cu(II)>Pb(II) in mg g⁻¹. The low amount of Pb(II) and Cu(II) adsorbed by minerals was attributed to the low available lead and copper concentration. At pH=9 the adoption of UF could effectively reduce heavy metals to very low levels. The same was observed at pH=8, provided that minerals were added. The prevailing metal removal process was the formation of precipitates/complexes with wastewater compounds.