Development of in-vessel components of the microfission chamber for ITER

M Ishikawa; T Kondoh; K Ookawa; K Fujita; M Yamauchi; A Hayakawa; T Nishitani; Y Kusama

doi:10.1063/1.3485080

Development of in-vessel components of the microfission chamber for ITER

Rev Sci Instrum. 2010 Oct;81(10):10D308. doi: 10.1063/1.3485080.

Authors

M Ishikawa¹, T Kondoh, K Ookawa, K Fujita, M Yamauchi, A Hayakawa, T Nishitani, Y Kusama

Affiliation

¹ Japan Atomic Energy Agency, 801-1, Mukoyama, Naka 311-0193, Japan. ishikawa.masao@jaea.go.jp

Abstract

Microfission chambers (MFCs) will measure the total neutron source strength in ITER. The MFCs will be installed behind blanket modules in the vacuum vessel (VV). Triaxial mineral insulated (MI) cables will carry signals from the MFCs. The joint connecting triaxial MI cables in the VV must be considered because the MFCs and the MI cables will be installed separately at different times. Vacuum tight triaxial connector of the MI cable has been designed and a prototype has been constructed. Performance tests indicate that the connector can be applied to the ITER environment. A small bending-radius test of the MI cable indicates no observed damage at a curvature radius of 100 mm.