Distribution of phosphorus, copper and zinc in activated sludge treatment process of swine wastewater

Bioresour Technol. 2010 Dec;101(23):9399-404. doi: 10.1016/j.biortech.2010.07.014. Epub 2010 Jul 27.

Abstract

Changes in swine wastewater chemical features during an activated sludge treatment process were surveyed on 11 farms, and analyzed with non-biodegradable elements, i.e., phosphorus (P), copper (Cu), and zinc (Zn). In piggery wastewater, they were linearly correlated with suspended solid (SS) concentrations and the major portion was in solid fractions. After the pretreatment step, they were removed, with 80% for total P, 85% for total Cu, and 84% for total Zn. After the activated sludge process, total P, Cu, and Zn were then removed at 83%, 96%, and 95%, respectively. Removing SS thoroughly at each step was shown to be the most important factor in preventing outflow of these elements, since there are linear correlations or a positive relationship between the removal of SS concentrations and their removal in solid form. Most of the P, Cu, and Zn in activated sludge effluent was in soluble form, and the concentrations of Cu and Zn in the effluent were low enough, while further P removal might be required.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Animals
  • Copper / analysis*
  • Phosphorus / analysis*
  • Sewage / chemistry*
  • Swine*
  • Waste Disposal, Fluid / methods*
  • Water Purification / methods*
  • Zinc / analysis*

Substances

  • Sewage
  • Phosphorus
  • Copper
  • Zinc