Toxaphene is a complex technical mixture that has been found ubiquitously in the environment but has caused issues for analysis, especially of individual congeners. This paper reports the elution order of 26 major toxaphene congeners on three gas chromatographic columns. The three different stationary phases generally had similar elution orders for the toxaphene congeners, but fewer co-elutions occurred on a low-bleed, low-polarity column. These congeners (except for two that co-eluted and were not added to the calibration mixture) were examined in air particulate matter standard reference materials (SRMs), 1648a, 1649a, and 1649b as well as SRM 3067 toxaphene in methanol for assignment of reference values. SRM 3067 had mass fractions an order of magnitude greater than the air particulate SRMs, which ranged from 0.568 +/- 0.018 ng g(-1) dry mass (B9-2006 in SRM 1648a) to 12.9 +/- 0.20 ng g(-1) dry mass (B9-715 (P 58) in SRM 1649a). The three air particulate SRMs all had different mass fractions and proportions of congeners relative to the sum of the toxaphene congeners. SRM 3067 may be useful as a technical mixture toxaphene congener calibrant. SRMs 1648a and 1649b will serve as reference materials for the analysis of 21 (three congeners were not included due to values below the detection limit or a potential polychlorinated biphenyl co-elution) toxaphene congeners in atmospheric particulate samples.