Influence of a magnesium-fluoride coating of magnesium-based implants (MgCa0.8) on degradation in a rabbit model

J Biomed Mater Res A. 2010 Jun 15;93(4):1609-19. doi: 10.1002/jbm.a.32639.

Abstract

MgCa0.8 cylinders (2.5 x 25 mm(2)) were coated with a magnesium-fluoride layer and implanted in the marrow cavities of both tibiae of 10 New Zealand White rabbits. The implantation duration was 3 and 6 months. The implants were clinically well tolerated. Micro-computed tomography revealed a new bone formation at the edges of the implants as well as an endosteal and periosteal remodeling. Using EDX-analysis, a calcium and phosphorus rich degradation layer could be found on the implant surface. It was covered by an incomplete layer containing fluoride. The analysis by weight before implantation and after 3 and 6 months, respectively, showed a slight decrease in volume in comparison to uncoated implants. When compared with uncoated implants, the mechanical properties of the coated implants exhibited a reduction in strength after 3 months. After 6 months, the strength of the coated implants was higher than that of uncoated cylinders.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Animals
  • Biocompatible Materials / chemistry*
  • Bone Substitutes / chemistry
  • Calcium / chemistry
  • Female
  • Fluorides / chemistry*
  • Magnesium / chemistry
  • Magnesium Compounds / chemistry*
  • Microscopy, Electron, Scanning / methods
  • Osseointegration
  • Prostheses and Implants*
  • Rabbits
  • Stress, Mechanical
  • Tibia / pathology
  • Time Factors
  • X-Ray Microtomography / methods

Substances

  • Biocompatible Materials
  • Bone Substitutes
  • Magnesium Compounds
  • magnesium fluoride
  • Magnesium
  • Fluorides
  • Calcium