We propose a simple all-fiber solution for coherent beam combining of Er-doped fiber amplifiers. This method, which we believe to be a new method, employs the effect of refractive index changes in Yb-doped fibers induced at approximately 1.55 microm by optical pumping at approximately 980 nm, which is performed for an active phase control in the fiber configuration. An algorithm based on population inversion in a two-level system supports the straightforward implementation of the effect into a feedback loop. Combining two 500 mW Er-doped amplifiers in a single-mode fiber is successfully demonstrated with control by approximately 120 mW laser diode. The method is shown to operate against the acoustic phase noise within the range of approximately pi rad and with a rate of approximately 2.6 pi rad/ms that potentially serves combining of at least 50 amplifiers similar to those used in practical work.