A compact, three-in-one, flow-through, porous, electrode design with minimal electrode spacing and minimal dead volume was implemented to develop a microbial fuel cell (MFC) with improved anode performance. A biofilm-dominated anode consortium enriched under a multimode, continuous-flow regime was used. The increase in the power density of the MFC was investigated by changing the cathode (type, as well as catholyte strength) to determine whether anode was limiting. The power density obtained with an air-breathing cathode was 56 W/m(3) of net anode volume (590 mW/m(2)) and 203 W/m(3) (2160 mW/m(2)) with a 50-mM ferricyanide-based cathode. Increasing the ferricyanide concentration and ionic strength further increased the power density, reaching 304 W/m(3) (3220 mW/m(2), with 200 mM ferricyanide and 200 mM buffer concentration). The increasing trend in the power density indicated that the anode was not limiting and that higher power densities could be obtained using cathodes capable of higher rates of oxidation. The internal solution resistance for the MFC was 5-6 Omega, which supported the improved performance of the anode design. A new parameter defined as the ratio of projected surface area to total anode volume is suggested as a design parameter to relate volumetric and area-based power densities and to enable comparison of various MFC configurations.
(c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.