The separation methods for soil samples applied at PSI are based on extraction chromatography and ion exchange. After sample leaching, the actinides are pre-concentrated via precipitation using oxalic acid. Besides the classical separation methods applying the extraction chromatographic resins U/TEVA (for U, Th), TRU (Pu, Am), new methods were recently implemented to increase the radiochemical recovery of particularly trivalent Am and Cm. These methods do not require initial reduction of Pu(IV) to Pu(III) but stabilize Pu on the tetravalent oxidation state using a mixture of NaNO(2)/H(2)O(2) in strong acidic medium. The Pu-fraction is then fixed along with Th onto Dowex AG 1-X2 anion exchanger resin. Th is eluted via complexation with 10M HCl, Pu via reduction with HI. The fractions of Am+Cm and U are loaded onto DGA resin. This resin shows extraordinary high distribution coefficients (k'-values) exceeding 10(4) (for Am) in strong nitric acid medium. The separation between U and Am is obtained quantitatively by decreasing the HNO(3) concentration from 3 to 0.25 M (stripping of the U-fraction) while Am can be easily eluted thereafter using 0.25 M HCl as complexation compound.