Ni(2+) selective sensors based on meso-tetrakis-{4-[tris-(4-allyl dimethylsilyl-phenyl)-silyl]-phenyl}porphyrin and (sal)(2)trien in poly(vinyl chloride) matrix

Vinod Kumar Gupta; Ajay Kumar Jain; Zakariyya Ishtaiwi; Heinrich Lang; Gaurav Maheshwari

doi:10.1016/j.talanta.2007.04.049

Ni(2+) selective sensors based on meso-tetrakis-{4-[tris-(4-allyl dimethylsilyl-phenyl)-silyl]-phenyl}porphyrin and (sal)(2)trien in poly(vinyl chloride) matrix

Talanta. 2007 Oct 31;73(5):803-11. doi: 10.1016/j.talanta.2007.04.049. Epub 2007 May 10.

Authors

Vinod Kumar Gupta¹, Ajay Kumar Jain, Zakariyya Ishtaiwi, Heinrich Lang, Gaurav Maheshwari

Affiliation

¹ Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee 247667, Uttaranchal, India.

PMID: 19073105
DOI: 10.1016/j.talanta.2007.04.049

Abstract

PVC-based membranes of meso-tetrakis-{4-[tris-(4-allyl dimethylsilyl-phenyl)-silyl]-phenyl}porphyrin (I) and (sal)(2)trien (II) as electroactive material with dioctylphthalate (DOP), tri-n-butylphosphate (TBP), chloronapthalene (CN), dibutylphthalate (DBP) and dibutyl(butyl) phosphonate (DBBP) as plasticising solvent mediators have been found to act as Ni(2+) selective sensor. The best performance was obtained with the sensor having a membrane of composition of I: sodium tetraphenyl borate: PVC in the ratio 5:5:150. The sensor exhibits Nernstian response in the activity range 2.5x10(-6) to 1.0x10(-1)M, performs satisfactorily over wide pH range (2-5.5) with a fast response time ( approximately 8s). The sensor was found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol or ethanol and acetone and could be used over a period of 4 months. Potentiometric selectivity coefficients determined by matched potential method (MPM) indicate excellent selectivity for Ni(2+) ions. The sensors could be used successfully in the estimation of nickel in different brand of chocolates and also as an indicator electrode in potentiometric titration.