Decreasing activated sludge thermal hydrolysis temperature reduces product colour, without decreasing degradability

Water Res. 2008 Nov;42(18):4699-709. doi: 10.1016/j.watres.2008.08.019. Epub 2008 Aug 29.

Abstract

Activated sludges are becoming more difficult to degrade in anaerobic digesters, due to the implementation of stricter nitrogen limits, longer sludge ages, and removal of primary sedimentation units. Thermal hydrolysis is a popular method to enhance degradability of long-age activated sludge, and involves pressure and heat treatment of the process fluid (150-160 degrees C saturated steam). However, as documented in this study, in a full-scale system, the use of thermal hydrolysis produces coloured, recalcitrant compounds that can have downstream impacts (e.g., failure of UV disinfection, and increased effluent nitrogen). The coloured compound formed during thermal hydrolysis was found to be melanoidins. These are coloured recalcitrant compounds produced by polymerisation of low molecular weight intermediates, such as carbohydrates and amino compounds at elevated temperature (Maillard reaction). By decreasing the THP operating temperature from 165 degrees C to 140 degrees C, THP effluent colour decreased from 12,677 mg-PtCo L(-1) to 3837 mg-PtCo L(-1). The change in THP operating temperature from 165 degrees C to 140 degrees C was shown to have no significant impact on anaerobic biodegradability of the sludge. The rate and extent of COD biodegradation remained largely unaffected by the temperature change with an average first order hydrolysis rate of 0.19 d(-1) and conversion extent of 0.43 g-COD(CH4)g-COD(-1).

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Anaerobiosis
  • Biodegradation, Environmental
  • Color
  • Hydrolysis
  • Polymers / chemistry
  • Polymers / metabolism
  • Sewage / chemistry*
  • Sewage / microbiology
  • Temperature*

Substances

  • Polymers
  • Sewage
  • melanoidin polymers