The Ta/TaN bilayer exhibits the best performance in the Cu metal multilevel interconnects, because it provides good coherence between Cu and dielectric layer. In the Ta/TaN bilayer, Ta has two phases: alpha-phase of body center cubic is preferred due to its lower resistivity (15-60 microOmega-cm), whereas beta-phase of tetragonal should be avoided due to high resistive (approximately 150-250 microOmega-cm). However, beta Ta most commonly forms on fcc TaN. Here we provide a simple scheme to bypass this high resistive phase by resputtering TaN prior to Ta deposition. We found that, with surface treatment by argon ion bombardment for enough time, alpha Ta phase can be directly formed, which is supported both by X-ray diffraction and resistivity measurement. Depth profiles of all elements from Auger electron spectroscopy reveals that the surface treatment induces a nitrogen deficient surface layer due to different sputtering yield, which causes phase changes from fcc TaN to hcp Ta2N followed by bcc Ta(N) and provide a favorable lattice constant for Ta alpha-phase formation.