Oil/water emulsions, containing liquid crystals, were developed employing Andiroba oil, PEG-12 Dimethicone and Crodafos CES. It was evaluated the influence of silicone surfactants on the emulsions stability and on the formation of liquid crystalline phases and therefore, physicochemical characteristics, such as rheology and zeta potential, were evaluated. Emulsions were prepared by the emulsions phase inversion method. All the formulations presented lamellar liquid crystalline phases. The PEG-12 Dimethicone addition did not change microscopically the liquid crystalline phases. The emulsions containing silicone demonstrated lower viscosity than those without the additive. This is an important feature, as the silicone did not change the rheological profile; however, the addition of silicone still can be used as a viscosity controller. The formulations had their viscosity increased 15 and 150 days after their preparation. This characteristic shows that the emulsions have their organization increased along the storing time. In the analysis of zeta potential, we could verify that all formulations presented negative values between -39.7 and -70.0 mV. Within this range of values, the emulsion physical stability is high (Fig. 10). It was concluded that the addition of PEG-12 Dimethicone kept the liquid crystalline phase of the emulsion obtained with Crodafos CES, influencing in a positive way in the system stability.