The scattering-matrix method was used for design of a surface transverse wave (STW) in-line acoustically coupled resonator filter on quartz. In this filter, two one-port STW resonators were coupled by means of a center reflector, grating phase shifters were placed between interdigital transducers and reflectors, and the pass band of the filter was located near the center frequency of the reflectors. At a frequency of about 509 MHz, insertion loss of about 5 dB and a 3 dB bandwidth of about 0.23 MHz was obtained. Differences between the measured and calculated amplitude responses are explained and design guidelines are presented. High STW velocity, low insertion loss, and very weak transverse mode make this filter attractive for high-frequency applications.