The global structure of microwave-assisted flash-extracted pectins isolated from fresh sugar beet pulp has been studied. The objective was to minimize the disassembly and possibly the degradation of pectin molecules during extraction. These pectins have been characterized by high-performance size exclusion chromatography with light scattering, viscometric detection, and atomic force microscopy (AFM). Analysis of molecular parameters was performed on 15 and 8 microm size column packings. Samples analyzed with 15 microm packing gave weight-average molar masses that ranged from 532,000 to 1.2 million Da, radii of gyration from about 35 to 51 nm, polydispersities from 1.78 to 2.58, intrinsic viscosities from about 3.00 to 4.30 dL/g, and recoveries from 8.40 to 14.81% of dry weight. Chromatography revealed that a bimodal distribution of high molar mass spherical particles and lower molar mass coils was obtained. AFM images of pectin corroborated this conclusion and further revealed that these strands and spherical particles were integrated into networks. It is demonstrated that microwave-assisted extraction of sugar beet pulp under moderate pressure and at relatively low temperature could extract under acid conditions high molar mass, moderate-viscosity pectin in minutes rather than hours as required by conventional heating.