Introduction: In the Luminex multiplexed immunoassay system, complex samples such as human serum are diluted to minimize disturbing matrix effects with a specific diluent. This diluent has to imitate the sample matrix to allow interpolation and has to provide optimal cytokine-antibody binding for all cytokines. Because diluents influence multiplex immunoassay results, this paper explores several methods to determine the quality of a chosen diluent.
Materials and methods: Two commercially available diluents, DY997 and RD6 from R&D Systems, were compared in a 19-plex immunoassay setup from Luminex.
Results: Using diluent DY997, multiplex signal intensity was reduced by 55% when spiked samples (chemokines and cytokines at 100 pg/mL) contained 50% v/v human serum, compared to samples containing 25% v/v. When using diluent RD6, signal intensity was reduced by 20% when samples contained 50% v/v human serum, compared to 25% v/v human serum. Diluent DY997 showed decreasing multiplex assay sensitivity with increasing protein concentrations, but not as low as in the presence of 50% v/v human serum.
Conclusions: In a 19-plex setup, this paper describes signal intensity, assay sensitivity and background signal levels in relation to the total volume-fraction of serum and protein concentration. For the determination of cytokines in serum samples with the multiplexed system Luminex the diluent RD6 seems more appropriate than the diluent DY997.