The reliability of grinding performance was assessed in 18 current Emirates Team New Zealand America's Cup sailors in two test sessions separated by 5 h using a custom-built ergometer. Sixteen different grinding conditions that varied by load (Light 39 N x m, Moderate 48 N x m, Heavy 68 N x m), deck heel (Flat 0 degrees control, Downhill 25 degrees, Uphill 25 degrees, Right 25 degrees, Left 25 degrees), and grinding direction (forwards, backwards) were assessed using peak power and external work over 5 s during maximal-effort 8-s grinds. Reliability statistics included the difference in mean (M(diff)), standard error of measurement (SEM), and intraclass correlation coefficients (ICC). External work (SEM = 1.6-6.9%; ICC = 0.91-0.99) was a more consistent performance measure than peak power (SEM = 1.3-9.6%; ICC = 0.84-0.99) across all test conditions. Testing under different load conditions resulted in external work SEMs of 1.6-3.9% with performance more reliable in lighter load conditions. Grinding performance during different heel conditions was less reliable (external work SEMs = 4.6-6.9%). Grinding direction (forward or backward) did not appear to affect performance reliability, although external work was 10-15% higher in forward grinding. Reliability is acceptable across various loads, but testing under different heel conditions may need some protocol development to allow the detection of smaller differences in performance.