Modelling hydrogen sulphide emission in a WWTP with UASB reactor followed by aerobic biofilters

Water Sci Technol. 2006;54(9):173-80. doi: 10.2166/wst.2006.861.

Abstract

Hydrogen sulphide (H2S) represents one of the main odorant gases emitted from wastewater treatment plants (WWTP) and a mathematical model can be a fast and low cost tool to estimate its emission. In this work H2S emission rates in a WWTP, composed of an up-flow anaerobic sludge blanket (UASB) reactor and an aerobic biofilter (BF), are estimated using four mathematical models available in the literature (AP-42, GPC, TOXCHEM + and WATER8). The results show that the GPC model leads to the best agreement with the experimental data, except for the biofilter due to its lack of capability to include biodegradation as a H2S removal process. On the other hand, the AP-42 and WATER8 models showed a slightly better ability to predict H2S removal in the biofilter than the TOXCHEM + model, as all models underestimate the H2S concentration decay.

MeSH terms

  • Aerobiosis
  • Air Pollutants / isolation & purification*
  • Biodegradation, Environmental
  • Bioreactors*
  • Filtration
  • Hydrogen Sulfide / isolation & purification*
  • Hydrogen Sulfide / metabolism
  • Models, Biological
  • Odorants / prevention & control*
  • Waste Disposal, Fluid / instrumentation
  • Waste Disposal, Fluid / methods*

Substances

  • Air Pollutants
  • Hydrogen Sulfide