NaAlH(4) with TiCl(3) and Al were mixed by ball-milling and cycled three times. The hydrogen storage properties were monitored during cycling, and the products were characterized by synchrotron X-ray diffraction. Because of the previously described formation of Al(1)(-)(y)Ti(y) with y approximately 0.15 during cycling that traps Al beyond the amount associated with the formation of NaCl, some Na(3)AlH(6) has no free Al to react with to form NaAlH(4). This was counteracted in the present work by adding a stoichiometric amount of Al that increases the theoretical storage capacity. Due to limitations in metal diffusion small amounts of Na(3)AlH(6) were still detected. When approximately 7 mol % more Al than the stoichiometric amount was added, the observed storage capacity increased significantly, and the Na(3)AlH(6) content was negligible after prolonged rehydrogenation. Cycled NaAlH(4) + 10 mol % TiCl(3) were desorbed to two different levels, and the diffraction patterns were compared. There is no change in unit-cell dimensions during desorption, and there is no sign of changes in the bulk composition of the Al(1)(-)(y)Ti(y) phase during a cycle. Adding pure Ti to a NaH + Al mixture by ball-milling in argon or hydrogen results in formation of TiH(2) that is stable during at least one cycle.