This study investigated the composition and leaching characteristics of municipal solid waste incinerator (MSWI) ash and slag. The modified slags were characterized after the melting of MSWI ash mixtures at 1400 degrees C for 30 min. The ash mixtures were composed of different types of MSWI ash, including cyclone ash, scrubber ash and bottom ash, in various proportions. The results indicate that the Cd leaching concentration of the cyclone ash and the Pb leaching concentration of the scrubber ash reached 1.82 and 8.7 mg/L, respectively, which exceeds the ROC EPA's current regulatory thresholds, and can thus be classified as hazardous. The results of the analysis of the metal content and the leaching behavior of heavy metals, showed high concentrations of Cu and Zn, but a low leaching ratio of these metals. Concerning the characteristics of the modified slags, the X-ray diffraction patterns of the MSWI fly ash slag showed that it contained large amounts of glass. The toxicity characteristic leaching procedure (TCLP) leaching concentrations of the target metals of all the slags, met the ROC EPA's regulatory thresholds. The leaching concentrations of heavy metals in the F- and B1-slag were lower than those in the cyclone and the bottom ash, because there was a high amount of SiO(2), which formed a net-like structure in the bottom ash.