Piezoelectric two-layer stacks of cellular polypropylene ferroelectrets: transducer response at audio and ultrasound frequencies

Michael Wegener; Steffen Bergweiler; Werner Wirges; Andreas Pucher; Enis Tuncer; Reimund Gerhard-Multhaupt

doi:10.1109/tuffc.2005.1516033

Piezoelectric two-layer stacks of cellular polypropylene ferroelectrets: transducer response at audio and ultrasound frequencies

IEEE Trans Ultrason Ferroelectr Freq Control. 2005 Sep;52(9):1601-7. doi: 10.1109/tuffc.2005.1516033.

Authors

Michael Wegener¹, Steffen Bergweiler, Werner Wirges, Andreas Pucher, Enis Tuncer, Reimund Gerhard-Multhaupt

Affiliation

¹ Department of Physics, University of Potsdam, Germany. mwegener@rz.uni-potsdam.de

PMID: 16285459
DOI: 10.1109/tuffc.2005.1516033

Abstract

Piezoelectric cellular polypropylene films, so-called ferroelectrets, are assembled in a stack with two active transducer layers. The stack is characterized with respect to its linear and quadratic response in a frequency range from 1 kHz to 80 kHz. A relatively smooth frequency response in the sound-pressure level is found for the individual layers as well as for both layers driven in phase. The piezoelectric response of the two-layer stack is twice the response of an individual layer over a rather broad frequency range. Furthermore, the influence of the preparation conditions on the resonance frequency and the effect of the quadratic distortion on the radiated sound are investigated both for the individual transducer films in the stack and for the stack system as a whole.