This paper examines the influence of the degree of refining of different pulps, produced from olive trimmings and eucalyptus wood, on various physical properties. Corresponding pulps were obtained by means of different cooking processes. Pulp from olive trimmings was obtained by means of an organosolv process and pulp from eucalyptus was obtained by means of a kraft process. Pulp from olive trimmings exhibited a lower specific surface area, water retention volume, breaking length, stretch and burst index, but a higher porosity, than eucalyptus pulp. On the other hand, the same degree of refining was achieved with less energy for olive pulp than for eucalyptus pulp. Mixed pulp from olive trimmings and eucalyptus provided paper sheets with acceptable physical properties but with reduced refining energy costs relative to eucalyptus pulp alone.