Objective: To test the safety and accuracy of the computer-assisted orthopaedic system for distal locking of intramedullary nails and apply it to internal fixation with intramedullary nails in the lower limb.
Methods: According to the theory of mechanical arms stereotactic localization in computer-assisted orthopaedic surgery (CAOS), we design a CAOS system for distal locking of intramedullary nails. The system comprised 2 independent modules: computer-assisted imaging and registration workstation; mechanical stereotactic framework. Ten plastic tibia models, 20 plastic femur models (Synbone AG, Malans, Switzerland) and 6 human cadaver lower limbs were randomly divided into 2 groups undergoing internal fixation with intramedullary nails (Orthofix, Germany). The first group (CAOS group with 5 plastic tibia models, 10 plastic femur models, 6 human cadaver tibia, 6 human cadaver femur; each nail had 2 holes, and 2 distal locking screws were inserted in each bone, which gave a total number of 54 holes) used a computer-assisted orthopaedic system, the second group (CONTROL GROUP is the same as CAOS group) used Orthofix mechanical targeting device for distal locking. Comparison between 2 groups was made in radiation exposure time, operating time, percentage of correctly placed screws.
Results: CAOS group: operating time was (4.44 +/- 2.99) min; radiation exposure time was (1.16 +/- 0.38) min; correctly placed screws rate was (100 +/- 0)%.
Control group: operating time was (10.42 +/- 4.18) min; radiation exposure time was (4.71 +/- 3.86) min; correctly placed screws rate was (94.44 +/- 0.36)%. Operating time and radiation exposure time in CAOS group were significantly shorter than those in control group (P < 0.05), no differences were found between 2 groups in relation to the percentage of correctly placed screws.
Conclusions: By using CAOS system for distal locking of intramedullary nails, the locking holes can be drilled accurately and safely. Radiation exposure significantly reduced.