The important adsorption components involved in the removal of trichloroethylene (TCE) by fibrous and granular activated carbons from aqueous solutions were systematically examined. Namely, adsorption of TCE itself (i.e., TCE vapor isotherms), water molecules (i.e., water vapor isotherms), and TCE in water (i.e., TCE aqueous phase isotherms) were studied, side-by-side, using 20 well-characterized surface-modified activated carbons. The results showed that TCE molecular size and geometry, activated carbon surface hydrophilicity, pore volume, and pore size distribution in micropores control adsorption of TCE at relatively dilute aqueous solutions. TCE adsorption increased as the carbon surface hydrophilicity decreased and the pore volume in micropores of less than 10 A, especially in the 5-8 A range, increased. TCE molecules appeared to access deep regions of carbon micropores due to their flat geometry. The results indicated that characteristics of both adsorbate (i.e., the molecular structure, size, and geometry) and activated carbon (surface hydrophilicity, pore volume, and pore size distribution of micropores) control adsorption of synthetic organic compounds from water and wastewaters. The important micropore size region for a target compound adsorption depends on its size and geometry.