A torsional microtransducer for high-power applications was developed using standard bulk lead zirconium titantate (PZT) placed upon a small rectangular prism made from phosphor bronze, with a tapered conical end serving as a horn and a machined interior to improve the actuator's response. Torsion was obtained from a prototype at the design frequency of 192 kHz as well as over a wide range of frequencies from 136 kHz to 1.02 MHz. Torsional vibration velocities of 335 mm/s at 192 kHz were measured at 27.3 V(RMS) on the 1.5-mm diameter output tip, amounting to 25,600 degree/s vibration velocity along the outer circumference of the tip. At 1.02 MHz, a torsional vibration velocity of 1750 mm/s (134,000 degree/s) at 17.8 V(RMS) was obtained through use of the thickness mode of the PZT elements. Using the design described in this study, high-power torsional transducers with diameters of 5 mm and below are now possible.