Moving of a nonhomogeneous, porous floc normal to a rigid plate

J Colloid Interface Sci. 2004 Jul 1;275(1):309-16. doi: 10.1016/j.jcis.2004.01.025.

Abstract

The boundary effect on the moving of a porous, nonhomogeneous, spherical floc normal to a rigid plate is analyzed theoretically for the case of low to medium Reynolds number. In particular, the drag force acting on the floc under various conditions is evaluated. A two-layer structure is adopted to simulate the nonhomogeneous nature of a floc. We show that if a floc is away from the plate, the streamlines surrounding the floc are distorted, but the degree of distortion becomes less significant if the floc is near the plate. The modified drag coefficient of a porous floc is orders of magnitude smaller than that of the corresponding rigid particle. For a fixed volume-averaged permeability, the effect of the presence of the plate on the behavior of a nonhomogeneous floc is more significant than that of a homogeneous floc, and this effect depends largely on the structure of a floc. The nonhomogeneous structure of a floc leads to a positive deviation from a Stokes-law-like correlation in the modified drag coefficient, and the smaller the volume-averaged permeability of a floc the greater the deviation. The presence of the plate has the effect of reducing this deviation. The nonhomogeneous structure of a floc on its modified drag coefficient is pronounced when it is close to a boundary.