The efficacy of copper shavings (Cu(0)) for the removal of Hg2+ from aqueous solution by amalgamation is demonstrated. Two kinds of copper shavings were investigated: (a) chemically processed shavings (Fluka) and (b) recycled shavings from scrap metal. Batch sorption experiments yielded very high retardation coefficients of 28 850-82 830 for the concentration range studied (1-10 000 microg/L Hg2+ dissolved in distilled water or in a 0.01 M CaCl2 matrix solution). Sorption data were well-described bythe Freundlich isotherm equation. Kinetic batch sorption experiments showed that 96-98% of Hg2+ was removed within 2 h. Column experiments were performed with a mercury solution containing 1000 microg/L Hg in a 0.01 M CaCl2 matrix with a flow rate of 0.5 m/d. No mercury breakthrough (c/c(0) = 0.5) could be detected after more than 2300 percolated pore volumes, and the high retardation coefficients determined in the batch studies could be confirmed. Copper was released from the shavings due to the amalgamation process and to copper corrosion by oxygen, resulting in concentrations of mobilized copper of 0.2-0.6 mg/L. Due to their high efficiency in removing Hg2+ from aqueous solution, the use of copper shavings for the removal of mercury from contaminated water is suggested, employing a sequential system of mercury amalgamation followed by the removal of mobilized copper by an ion exchanger such as zeolites. Possible applications could be in environmental technologies such as wastewater treatment or permeable reactive barriers for in situ groundwater remediation.