In many cases, treatment of wastewaters requires a combination of processes that very often includes biological treatment. Wet oxidation (WO) in combination with biotreatment has been successfully used for the treatment of refractory wastes. Therefore, information about the biodegradability of wastewater solutes and particulates after wet oxidation is very important. The present work proposes a model that can describe the oxidation process via organic concentration characteristics such as chemical oxygen demand (COD), biochemical oxygen demand (BOD), and immediately available BOD (IA BOD) and so can allow the prediction of biodegradability (i.e., BOD/COD ratio). The reaction mechanism includes the destruction of nonbiodegradable substances bytwo pathways: oxidation to carbon dioxide and water and oxidation to larger biodegradable compounds with their further degradation to smaller ones measured via IA BOD. The destruction of small biodegradable compounds to end products is also included in the model. The experiments were performed at different temperatures (170-200 degrees C) and partial oxygen pressures (0.5-1.5 MPa) in a batch stainless steel high-pressure autoclave. The model of concentrated thermomechanical pulp circulation water was selected for the experiments. The proposed model correlates with the experimental data well and it is compared with other WO models in the literature.